Page tree
Skip to end of metadata
Go to start of metadata

All Solid Model

All Solid Model operation is used to create the smallest solid model that can take all the drills in the project inside. 

Model Sampling DetailIt allows for more often sampling of points that create cross section lines. With the increase in detail, performance will be decreased but model accuracy will be improved. When the lowest value is chosen, operation is carried out without sampling on sections.
Create Intersection

It is activated if you want to create intersections between sections creating the solid model. 

Number of Intersections: It is the number of intersections to be created between sections.

Normalize Cross Sections

Min. Point Distance: Minimum distance of every line segment on section line. For example, if min. point distance is given to be 5; all points between A point and B point with this distance are deleted. 

Min. Angle: It is what degree every sequential line segment will be on the section line. For example; if there are 360 points for 360 degrees in a circle; if it is given 30 degree minimum angle will be 360:30 = 12 points and circle is turned into a dodecagon.


Two different methods may be used to create intersurface solid model. These are, Shell Model and Tetrahedron Model methods.

  • Shell Model: Shell Model is mostly preferred to create a realistic solid model between non-parallel surfaces.
  • Tetrahedron Model: It is mostly preferred to create a solid model between parallel surfaces.

  • No labels