Page tree
Skip to end of metadata
Go to start of metadata

Add Exitway

Using the road width and slope application width values, it allows the exitway to be added between the selected axis and two digits or between two different elevations. 

Before the operation is entered, the axis drawing of the road to be used as the exitway is performed by the Input / Multipurpose operation. 

When machining is done after the axis drawing, first the path width value of the exitway is entered, when the window is closed with OK, the slope application width value of the exitway will be determined. 

Once the width values have been entered, the exitway previously digitized from the 3D screen is selected. The exitway will be added automatically according to the width values specified after this process. 

The surface of the quarry or all surfaces must be renewed in order to be able to see the final connection with the furnace surface and the exit path added to the project. 

  • No labels