Create Section
It is the operation, in which cross sections that will enclose the solid model automatically with a freely drawn section line on solid model, is created under Solid Models.
By courtesy of this operation, you can re-model the solid model by choosing only the cross sections using the automatically created cross sections along the section line you have drawn on solid model. For example; you can calculate how much of the ore you have modelled is processed in a specific progression direction.
In order for this operation to work, section line must be drawn with the help of multiline operation on solid beforehand. When the operation is being carried out, this section line should be chosen in "Choose section axis line" command.
| Option | Description |
|---|---|
| Cross Section Range | It is the parameter that allows to create sections in the specified cross section range along the section line. |
| Number of Cross Sections | It is the parameter that allows to create sections in the specified number of cross sections along the section line. |
| Automatic Section Creation Range | It is the section that allows to create cross sections in the specified start and end distances along the section line. By holding down left mouse button, start and end distance values can be adjusted. |
| Start Skew Angle (Horizontal / Vertical) | It means horizontal and vertical angle values of section line start plane that will be taken into consideration in automatic section creation. Section planes that are suitable for the determined angle value is previewed on graphical interface. |
| End Skew Angle (Horizontal / Vertical) | It means horizontal and vertical angle values of section line end plane that will be taken into consideration in automatic section creation. Section planes that are suitable for the determined angle value is previewed on graphical interface. |
| Preview Section Width | Section width value of the sections to be created in the specified cross section ranges, in preview, along the section line, which is selected at the beginning of operation. |
| Preview Section Height | Section height value of the sections to be created in the specified cross section ranges, in preview, along the section line, which is selected at the beginning of operation. |
| Route Information | It is the part where Route Information of the previously drawn section line (Minimum / Maximum X, Y, Z values and Length) is shown |
