| Option | Description |
|---|
| Borehole Criteria |
| Borehole Group | This is the field used to select a borehole group. It provides a listing of the boreholes remaining in the selected borehole group. |
| Borehole Name | Allows borehole selection from the drop-down borehole list. Bulk selection or selection from the list can be made. |
| Horizontal Distance | In the grid screen (canvas) where the boreholes are displayed, it represents the horizontal distance between two boreholes. |
| Vertical Distance | It allows the boreholes to be shifted vertically by the entered distance value on the grid screen (canvas) where the boreholes are displayed. |
| Elevation Value | It allows borehole elevation values to be displayed on the grid screen (canvas). |
| Elevation Interval | It enables the borehole elevation values to be displayed within the determined elevation range. |
| Show Selected Boreholes | It allows boreholes selected from the graphic screen to be displayed on the grid screen. |
| Show Boreholes | It ensures that all changes made to the parameters are applied in the borehole correlation window. |
| Lithology Properties |
| Horizontal Length | Allows the horizontal length of the borehole log displayed on the grid screen to be increased. |
| Distance Between Boreholes | In the case of using more than one borehole side by side on the grid screen, it enables the distance between boreholes to be determined. |
| Show the Texture | Project features allow the pattern definitions specified in the lithology definitions to be displayed on the borehole log. |
| Interval Properties |
| Horizontal Length | It allows to increase in the horizontal length of the range definitions displayed on the grid screen. |
| Interval | Allows the selected interval definition to be displayed on the grid screen. These intervals can be interval definitions of seam/vein, oxidation, sulfur, alteration, stack, or combined. |
| Update Interval | Elevation values can be edited by clicking on the interval definitions on the grid screen. It allows users to update such changes made. |
| Add Interval | It allows adding a new interval to the selected borehole data by using the opened interval adding window. After the interval addition process, the grid screen should be updated with the show borehole operation. |
