Horizontal / Vertical / Slope / Percent Usage
Vertical Values and Functions
Positive or negative numerical values can be entered. For example, 1, 2, ...
Deflection definitions can be defined using the Vertical Deflection Definitions editor. Users can use the V01, V02 etc values using the drop-down menu in the vertical line.
Arithmetic operations are available. For example -1/2, 6/3, BEL or -6/6, 2*2, BER.
Formulas can used. For Example:
* -V01*D,10 : 10 meter interval distance with V01 distance and elevation difference carrying the superelevation value
* Variable values can be used; OFFSET, CODE.O, CODE.Z
Vertical Values and Functions
Positive or negative numerical values can be entered. For example, 1, 2, ...
Transition curve width values can be used in the Transition Curve Definition editor. Users can use the R01, R02 etc values using the drop-down menu in the vertical line.
Arithmetic operations are available. For example:
* -1, 6/3, BEL or -6/6, 2*2, BER
Formulas can used. For Example:
* 10,R01+R02: Interval distance equal to the sum of values R01 and R02 with the elevation difference of 10 meters
* 5, (R01+R02)/2: Interval distance equal to half of the sum of values R01 and R02 with the elevation difference of 5 meters
* Variable values can be used; OFFSET, CODE.O, CODE.Z
Slope (Percentage) Values and Functions
Detailed definitions can be specified using the Typical Cross Section Editor by defining the vertical distance and slope value. Positive values draw left from the defined point while negative values draw right from the defined point. Positive values draw upwards for slopes while negative values draw downwards.
Positive or negative numerical values can be entered. For example, 1, 2, ...
Superelevation values can be defined using the Free Superelevation Values Definition Editor. Users can use the D01, D02 etc. values using the drop-down menu in the vertical line. Users can define D01, D02 etc. using the drop-down menu. Use DL for left superelevation and DR for right superelevation.
Arithmetic operations are available. For example:
* 5%10*D01,REL or 7%(D01+D02)/2,RER
* Variable values can be used; OFFSET, CODE.O, CODE.Z