Page tree
Skip to end of metadata
Go to start of metadata

Tools | Create Seam Surface (Nearest Adjacent + Fault)

Create Seam Surface (Nearest Adjacent - Fault) operation is used to create surface including faults with nearest adjacent method taking into account the lithology and seam levels.  

Surface shall be created according to fault type, direction, slope and pulse after the operation. 

OptionDescription
Drilling Points

Coordinate Filter: It is a position filter belonging to drilling/lithology/seam level (top, middle, bottom, lowermost) upon which the surface shall be created. In order for seam levels to be observable on filter, seam descriptions must be made on drills with Specify Vein Points operation. 

Lithology/Vein Filter: It is the filter on which the determination of which lithology or seam unit, upon which the intended surface shall be created, is made.

Choose Fault from Active ProjectFault: Fault to be integrated in surface is chosen from Faults tab under Catalog.

2D Grid

Use The Box Enclosing as Border:It is selected in order to determine the outer border of the surface to be created as a box according to the outermost drill/lithology/seam. 

X Range: Sampling range on X direction. 

Y Range:Sampling range on Y direction.

Cut Surface

Within Border:  It is used to create the part inside or outside the selected border of the surface to be created chosen from graphic interface. 

If border selection is carried out while the option is active; surface shall be created inside the border. 

If border selection is carried out while the option is not active; surface shall be created outside the border.

Drills from the Project

Open Filter Window: It is used in creating a surface by applying drilling filter. 

Group Filter: It is used in creating a surface according to specified drilling groups.

Output LayerLayer:The name of the layer, on which the created surface will be saved, is determined.

  • No labels